Captor M
Low-Power SBC based on the Intel® Pentium® M/Celeron® M Processor
PRODUCT HIGHLIGHTS
- Low-Power/Low-Profile Design
- Supports Intel® Pentium®M and Celeron® M Processors
- Built-in Graphics
- Up to 2GB of DDR 333/266
- Up to Six (6) RS232 Serial Ports
- Eight (8) to Ten (10) Year Guaranteed Production
Product Description
The Captor M™ single board computer (SBC) is a full-size PICMG compliant CPU card (4.53"x13.3", standard 1.0 rev02), and supports low-power Pentium® M and Celeron® M processors. These processors allow the Captor M to run at a fraction of the wattage of standard processor based SBC’s. The Intel® Pentium® M and Celeron® M processors also enable the Captor M to be cooled by a low-profile heat sink and fan. This significantly reduces the amount of horizontal space the SBC takes up in the backplane and allows usage of expansion card slots that would normally be blocked by a larger standard processor fan. The Captor M features the Intel® 855GME chipset, which offers integrated Intel® Extreme Graphics 2 technology, optional LVDS with backlight support, AC’97 sound, and a host of standard I/O features. The chipset supports 400MHz front side bus, and allows up to 2GB of DDR 333/266 SDRAM. Network connectivity is available through one (1) 10/100 ethernet, which can be factory upgradeable to one (1) 1Gb controller. There is also an option for a second 10/100 or 1Gb ethernet. The Captor M features two edge connectors that plug into an industry-standard PCI-ISA passive backplane. This standard allows multiple systems to run in a single enclosure, ideal for applications such as: networking, telephony, robotics, automation and industrial.
Technical Specifications
| Form Factor | Full-size PICMG 1.0 rev02 compliant form factor (4.53"x13.3") | |
| Microprocessor | Intel® Pentium® M processor or Celeron® M processor (Socket 479) | |
| Chipset | Intel® 855GME | |
| Front Side Bus | 400MHz | |
| System Bus |
32-bit PCI and 16-bit ISA available through backplane |
|
| Onboard I/O | Two (2) 40-pin PATA100 EIDE connector One (1) 44-pin IDE connector for Flash Disk (sharing secondary IDE) One (1) Mini-PCI (PCI
2.2 33/32MHz connector Type III) |
|
| Video Graphics | Onboard
integrated graphics utilizing Intel®
Extreme Graphics 2 technology (Backplate access) Dual-channel LVDS controller (optional) |
|
| Memory | Two (2) DIMM sockets support up to 2GB of single channel DDR333/266 SDRAM | |
| Ethernet |
One (1) 10/100 ethernet, factory upgradeable to 1Gb.
Optional second 10/100 or 1Gb ethernet (Backplate access) |
|
| Sound | AC’97 compatible sound controller | |
| Industrial Devices |
Hardware
monitoring POST code diagnostics Watchdog timer |
|
| BIOS |
AMI® |
|
| Battery | Removable lithium battery for CMOS memory | |
| Power Connector | Power is supplied through the backplane connectors | |
| Environmental Specifications |
Temperature Humidity |
|
Ordering Information
|
Our Commitment to Quality and Dependability
All Corvalent products carry an eight (8) to ten (10) year production life cycle guarantee. This longevity can greatly reduce your redesign and recertification costs, and increase your ROI. Corvalent products are designed and manufactured for industrial applications. Our ruggedized products are specifically engineered to operate under diverse environmental ranges, and feature dependability far beyond commercially available PC motherboards. In addition, our internal product testing procedures are among the industry’s most stringent. All products are subjected to an extended burn-in process, and a strict ISO 9001:2000 quality control system. Contact us at sales@corvalent.com, 512-456-2400 or toll free at 888-776-7896 for more information.
[ Top ]